Nylon 6 (PA6)
Supplier in Dubai & UAE

Nylon 6 is used for textile and industrial yarn, carpet fibre, tyre cord, injection-moulded gears, bearings and housings, glass-filled automotive parts, cable ties, BOPA and blown packaging film and monofilament.

The CAS number of Nylon 6 (PA6) is 25038-54-4. Its molecular formula is (C₆H₁₁NO)n and its molecular weight is Polymer (relative viscosity 2.4 – 3.2 by grade).

Nylon 6 (PA6) (CAS 25038-54-4) is also sold as PA6, nylon 6, polyamide 6, polycaprolactam, nylon 6 chips, PA6 granules. Please mention the CAS number in your enquiry so we quote the right material.

Chelora Chemicals UAE is a B2B chemical supplier and distributor of Nylon 6 (PA6), serving Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with full COA, SDS and TDS documentation and export to the wider GCC.

Yes. We deliver to all seven Emirates, including Jebel Ali and JAFZA in Dubai, KEZAD, Musaffah and Khalifa Port in Abu Dhabi, and SAIF Zone and Hamriyah Free Zone in Sharjah, as well as RAKEZ, Ajman Free Zone and Fujairah.

We supply Nylon 6 as bright and semi-dull textile chips and as engineering and film grade granules, with relative viscosity and moisture confirmed on the COA. Please state the grade, relative viscosity, lustre and your intended end use.

Nylon 6 (CAS 25038-54-4) is made from a single monomer, caprolactam. It is different from nylon 6,6 (made from hexamethylenediamine and adipic acid), from nylon 12 and from caprolactam itself. Please quote the grade and CAS number.

Share the grade (textile, engineering or film), relative viscosity and packing, quantity, packing, Incoterm and delivery Emirate through our contact page and our team aims to respond within one business day.

Typically 25 kg foil-lined or moisture-barrier bags on pallets, with jumbo bags and octabins for large users, and full 20 ft or 40 ft container loads for regular supply.

The minimum order depends on packing and current stock. We handle everything from a few drums or small packs for trials and lab qualification up to full container loads.

Store sealed bags indoors in a cool, dry, well-ventilated area away from direct sun, heat and ignition sources. Reseal opened bags promptly and dry the resin before processing.

Nylon 6 (PA6) pellets are generally not classified as hazardous for transport, but fine dust can form combustible dust clouds and molten polymer causes severe burns. Process with ventilation and follow the SDS supplied with the grade.

Yes. We export from the UAE to Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, East and West Africa, South Asia and other markets on EXW, FOB, CFR, CIF, DAP or DDP terms, subject to the import rules of each destination.

Yes. Samples are available for qualification on request, together with the COA and SDS, so your QC or R&D team can approve the material before a commercial order.

Nylon 6 is made from one monomer, caprolactam, and melts near 220 °C, while nylon 6,6 is made from hexamethylenediamine and adipic acid and melts near 260 °C. Nylon 6 is easier to process and dye, and nylon 6,6 is stiffer and more heat resistant.

Water breaks amide links in the melt and causes bubbles, silver streaks and lower viscosity. Chips are packed in moisture-barrier bags and are dried to a very low level before spinning, extrusion or moulding.