PET Resin
Supplier in Dubai & UAE

PET resin is used for carbonated-drink and water bottles, preforms, food trays and thermoformed packs, BOPET film, polyester staple and filament fibre, strapping, sheet and engineering compounds.

The CAS number of PET Resin is 25038-59-9. Its molecular formula is (C₁₀H₈O₄)n and its molecular weight is Polymer (IV 0.62 – 0.86 dL/g by grade).

PET Resin (CAS 25038-59-9) is also sold as PET, PETE, polyester chips, polyethylene terephthalate, bottle-grade PET, PET granules. Please mention the CAS number in your enquiry so we quote the right material.

Chelora Chemicals UAE is a B2B chemical supplier and distributor of PET Resin, serving Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with full COA, SDS and TDS documentation and export to the wider GCC.

Yes. We deliver to all seven Emirates, including Jebel Ali and JAFZA in Dubai, KEZAD, Musaffah and Khalifa Port in Abu Dhabi, and SAIF Zone and Hamriyah Free Zone in Sharjah, as well as RAKEZ, Ajman Free Zone and Fujairah.

We supply PET resin as bottle, fibre, film and sheet grade chips, with the intrinsic viscosity and colour confirmed on the COA. Please state the grade, IV, colour requirement and your intended end use.

PET (CAS 25038-59-9) is the polyester of terephthalic acid and ethylene glycol. It is different from PBT, PETG and PEN, from recycled PET flakes and from polyester resins used in coatings and composites. Please quote the grade and CAS number.

Share the grade (bottle, fibre, film or sheet), IV and packing, quantity, packing, Incoterm and delivery Emirate through our contact page and our team aims to respond within one business day.

Typically 25 kg moisture-protected bags on pallets, with jumbo bags and octabins for large users, and full 20 ft or 40 ft container loads for regular supply.

The minimum order depends on packing and current stock. We handle everything from a few drums or small packs for trials and lab qualification up to full container loads.

Store sealed bags indoors in a cool, dry, well-ventilated area away from direct sun, heat and ignition sources. Reseal opened bags promptly and dry the resin before processing.

PET Resin pellets are generally not classified as hazardous for transport, but fine dust can form combustible dust clouds and molten polymer causes severe burns. Process with ventilation and follow the SDS supplied with the grade.

Yes. We export from the UAE to Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, East and West Africa, South Asia and other markets on EXW, FOB, CFR, CIF, DAP or DDP terms, subject to the import rules of each destination.

Yes. Samples are available for qualification on request, together with the COA and SDS, so your QC or R&D team can approve the material before a commercial order.

IV reflects molecular weight, which decides melt strength and mechanical performance. Bottle grades are typically around 0.80 dL/g, while fibre and film grades use lower values, so the correct IV is specified for each process.

Yes. PET breaks down chemically if melted with moisture, which lowers IV and clarity. Chips are normally dried in a desiccant dryer to a very low moisture level before moulding, extrusion or spinning.