Polyvinyl Chloride (PVC) Supplier in UAE

Polyvinyl Chloride (PVC) is one of the world's most versatile thermoplastics. It is used to manufacture UPVC pressure pipes, drainage pipes and electrical conduits for construction and infrastructure; rigid window and door frame profiles; flexible wire and cable insulation and jacketing; PVC flooring (LVT, vinyl sheeting) and wall coverings; automotive interior components including dashboards and door panels; and medical-grade products such as blood bags, IV tubing and dialysis sets. Its combination of chemical resistance, mechanical strength, fire retardancy and low cost makes it indispensable across construction, automotive, electronics and healthcare industries throughout the UAE and globally.

The CAS registry number of Polyvinyl Chloride (PVC) is 9002-86-2. This number applies universally to the poly(vinyl chloride) polymer regardless of K-value, process grade (suspension or emulsion) or molecular weight distribution. When specifying or ordering, always confirm the required K-value grade alongside the CAS number to ensure the correct product for your application.

PVC is produced in three primary commercial grades: Suspension-grade PVC (S-PVC) — the most widely produced form, made by suspension polymerisation and supplied as a free-flowing white powder with particle sizes of 100–160 µm and K-values typically from K-57 to K-70; this is the standard material for pipes, profiles and cable insulation. Emulsion-grade PVC (E-PVC) — produced by emulsion polymerisation to give finer particle sizes (1–20 µm) suited for paste and plastisol applications in coatings, flooring tiles, dip-moulded articles and spread coating. Paste/plastisol grade — a sub-category of E-PVC specifically designed for high-viscosity PVC plastisol formulations used in automotive underbody sealing, flooring and wallcovering applications.

Chelora Chemicals UAE is a leading supplier of Polyvinyl Chloride (PVC) resin in suspension (S-PVC) and emulsion (E-PVC) grades, K-57 to K-70, to manufacturers, compounders and distributors across the UAE and GCC. We supply customers in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, as well as Saudi Arabia, Kuwait, Qatar, Bahrain and Oman. Contact us via chelorachemicalsuae.com for current pricing and availability.

Yes. Chelora Chemicals UAE delivers PVC resin to all seven UAE emirates including Dubai (Jebel Ali FTZ, Al Quoz), Abu Dhabi (Mussafah, ICAD, KIZAD) and Sharjah (Hamriyah FZ, SAIF Zone, Sharjah Industrial Area). We also provide GCC-wide logistics to Saudi Arabia, Kuwait, Qatar, Oman and Bahrain through established freight partnerships. Contact our sales team with your delivery address, required K-value grade and volume for a tailored quote and estimated lead time.

The K-value (Fikentscher K-value) is a dimensionless number derived from solution viscosity measurements that correlates with the average molecular weight of the PVC resin. Higher K-values indicate higher molecular weight, yielding better mechanical properties (tensile strength, impact resistance, elongation) but requiring higher processing temperatures and torque. Lower K-values process more easily at lower temperatures with better melt flow but lower final properties. Common grade uses: K-57/58 for injection moulding and shoe soles; K-65/67 for general pipes, profiles and cable insulation; K-68/70 for high-pressure pipes and structural profiles. Selecting the correct K-value is critical to achieving the required processability–performance balance in your application.

PVC resin powder in its unprocessed form is classified as a nuisance dust and should not be inhaled. Prolonged dust inhalation can cause respiratory irritation. When PVC is thermally processed (compounded, extruded, moulded) at elevated temperatures, it can release hydrogen chloride (HCl) vapour and plasticiser fumes — adequate ventilation, LEV (local exhaust ventilation) and appropriate heat stabiliser systems are essential. Always consult the current SDS and comply with UAE and GCC occupational health and safety regulations. PVC itself is not classifiable as carcinogenic or reproductively toxic, but additives (certain plasticisers, lead-based stabilisers) may have their own hazard classifications.

Minimum order quantities for PVC resin depend on the specific K-value grade, packaging format and delivery location. Contact Chelora Chemicals UAE to discuss your requirements — we can accommodate small trial quantities for R&D and compounding development as well as full container-load (FCL) or multi-FCL supply for large manufacturing operations. We aim to provide flexible MOQs to support businesses of all sizes in the UAE and GCC chemical market.

PVC resin is available in the following standard packaging formats: 25 kg multi-layer PE-lined paper bags for small orders and R&D use; 500 kg FIBCs (flexible intermediate bulk containers / jumbo bags) for mid-volume production; and 1,000 kg FIBCs for high-volume continuous production. All packaging incorporates PE-lined inner bags to prevent moisture ingress, which is critical for maintaining PVC powder processability and thermal stability. All packs are GHS-labelled with K-value, batch number and CoA reference. Custom packaging and private-label options are available for distributors.

PVC resin should be stored in a cool (below 40 °C), dry, well-ventilated warehouse away from direct sunlight and sources of heat. PVC powder is slightly hygroscopic; keeping packaging tightly sealed prevents moisture absorption that can impair thermal stability and processing characteristics. Store away from strong acids and oxidising agents. The product has a shelf life of approximately 24 months from the manufacture date when stored under recommended conditions. UAE storage facilities must comply with applicable fire safety and chemical storage regulations, including containment for spills.

Yes. Chelora Chemicals UAE exports PVC resin to customers throughout the GCC and to international markets. We provide complete export documentation including Certificate of Analysis, Safety Data Sheet, Certificate of Origin, packing list and Bill of Lading. PVC is not classified as a dangerous good under IMDG in standard packaging formats, facilitating straightforward international logistics. Importers should verify applicable national regulations at the destination country — some countries have restrictions on specific PVC additive systems (lead stabilisers, certain phthalate plasticisers). Contact our export team to discuss requirements for your destination.

Rigid PVC (UPVC — unplasticised PVC) is compounded without primary plasticisers, producing a stiff, high-modulus material with excellent chemical resistance, dimensional stability and fire retardancy. It is used for pressure pipes, drainage pipes, window and door profiles, and electrical conduits. Flexible (plasticised) PVC is produced by incorporating plasticisers — typically phthalates (DINP, DEHP) or non-phthalate alternatives — at levels of 30–70 phr (parts per hundred resin), which reduce the glass transition temperature from ≈ 80 °C to well below ambient, producing a soft, compliant and elastic material. Flexible PVC is used for wire and cable insulation, floor coverings, medical tubing, automotive trim, hoses and synthetic leather. The K-value of the resin, the plasticiser type and level, and the stabiliser system together determine the final compound properties.